[Zmodeler 3] issues with right side wheels offsetting once vstancer is enabled
Hey, everyone. I'm extremely new to converting models to play in gta. I'm actually in the process of converting my first car.
The issue I'm currently facing is the wheels on the right side of the vehicle offsetting inward once vstancer is enabled. Now, I am aware that this is an issue on my end and not vstancer. However, I have no idea how to fix my error.
I've attempted a few "fixes" with no success.
Does anyone know if there is a correct way to address this issue with success?
Apologies in advanced, if this topic has already been addressed and answered. I've searched but haven't had any luck with guidance.
What I would do....
Reset all axis on wheels and dummies...
Move all wheel lods into right places, into their correct "default stance"...
Center all wheel lods...
Copy all new wheel axis to wheel dummies...
Wheels must be working 100% or You are missing something or You are not giving out enough info...
Right on. I'll give that a shot. Thank you for the response.
Another thing I think is worth noting is that once I've realized the issue with the wheels, I looked at the top view and noticed my car was slightly offset to the pivot (looked like it was about the same spacing as my wheel offset issue). I'm not entirely familiar with Zmodeler, as it is all new to me but I assumed that could be the cause of the issue.
I attempted to reset my vehicle dummy to the world & I also dismissed my chassis and tried to reset that to the world too, but it didn't seem to take any affect with either of those options.
I then attempted to correct the offset by moving everything at once, including the COL, to be centered with the pivot but it didn't seem to change anything.
Again, I'm extremely new to all of this, so I hope I'm not sounding too stupid. Also, thank you again for the info. I'm going to give that a shot, once I get off work today.
So, I believe I have it all sorted out. I wanted to have one more look at everything on my car while in Zmodeler, prior to doing any further adjustment to the wheels & I noticed the chassis dummy wasn't center of the pivot. Not sure how I missed that last time. Anyway, upon restoration of the chassis dummy to the center of the pivot, I realized that was my issue all along.
@Rickyxo Most of Your addressed issues can be solved by Yourself, by properly understanding the "Display" tab and its subfunctions in ZM3.