Best posts made by Asyr0n

Managed to get it to work again! Plus could test the new Glas roof as well...

I guess i just leave this here

The usual Treatment will be done:

• New detailed Interior
• Boot Compartment
• New Detailed Engine & Bay

Doin my best to get you a High Detailed mod as usual. Cheers

Help me get more of these exclusive 3D models and DONATE to my PAYPAL or if you like my work... become my patron on PATREON and get exclusive Pre-Release Access & access to my VIP Releases

@Ramona @JCM Well Guess what, those screens actually made me curious so i decided to model it!

Ingame as normal painted:

AND...

Working on a Glass version as well like those on screens...

But now i'm having issues spawning the car, still too highpoly i guess, gonna reduce it abit more.
Enjoy

Finally after couple of hours reducing Polycount... i managed to spawn the car bugs free!!!
Now i can finally start workin on the detail

Some screens:
before Polycount Reduce:

After Reducing:

And as reward...

I probably will need to reduce some more parts to be able to play around with shaders so it can look HQ later on.
Bonnet interior needs to be modeled and Interior + engine needs retexturing, so alot of hours of work still to go!

Alfa Romeo Disco Volante by Touring Superleggera!

Follow the creation steps of this beautiful car!
Jeremy Clarkson (Top Gear at that time) once said: "This is the Full baby Jesus"

For some it's just a car... but for me it's the car of my dreams!
***** AND the reason why i started doin Car mods for GTA5! *****

Want some backstory?
Well... If you don't know what car it is, watch this:

Or read this if you want to: https://www.carthrottle.com/post/heres-everything-you-need-to-know-about-the-alfa-disco-volante/

• Polycount of 3d model was already reduced from 800k to 400k
• Now i start separating the parts from rest of body (dorrs, bonnet, boot,...)
• And searching for donor parts for it, already found some out of The Crew models!

I hope you are as excited as i am!

Here some Screens

Had to restart the Retexturing & Conversion Process all over Thx to Oleg's Buggy Zmodeler3!

Took the occasion and added some details on same time:

• Better Stitches overall
• Added Stitches to Seats and Armrest
• New Textures & Bumpmaps on Engine & Interior
• Better Transparent Grills on Hood and Body

Last first export was 15.5Mbs Big, so i hope i can manage to export it in lower size next time.

Starting NEW Conversion Process

Here the Screens:

As Promissed, Beta Pre-Release on my Patreon Page for my supporters!
Public Release coming next week when it's finished! Dirtmaps, and a couple of details to fix before Release!
Help me get more of these rare models by supporting me on Patreon or with a small Donation. More of these are planned!!!

Cheers

@kim-seong-il I only do ADD-On's recently cause of the very Highpoly models! And for LODs... too much work reducing the 3D models to an exceptable GTA5 engine level! But you can use the car files and use em as Replace if that's what you are goin for.

@JCM This model had no roof and i never seen a picture of a J50 with a Roof so i guess i'll leave it out till i find something!

Started detailing the Interior,

@ReNNie It's actually something i'm tryin out, seems like the page does not count every download as intended, maybe a scam? I don't know! But i guess if you have multiple mods uploaded there it still could be worth it! I'm only testing for now, could go back to normal download if i see no progress!

The only reason i'm doin it is to collect funds to finance special Turbosquid/Squir models for all of you to enjoy later, thing is people are not ready to spend even 1$ for a mod! And that is pretty sad!
Believe me i have a long list of cars from those sites i'd love to bring to V but looks like i'm not getting there this quick!

Sergio is V1 Ready!

Will be available for everyone to Download TOMORROW (If everything goes well :P)

Cheers

Here we go finally First Ingame Test!
Few Textures to fix and shaders to assort plus dials to add and it will be good for release

Long no post in here guys! But i will be posting more often in future!
Presenting you the Ferrari F60 America. My First Ferrari and Supercar.

Model is from Squir and alot of parts have already been added and replaced like Engine, Doorsills, doors, new Interior ... couple of details from all over the place ^^ only hope i'm worthy for such a beautiful car.
Coming up soon

http://imgur.com/a/RExpl

Good news guys! Last details have been added, couple more small details to solve and car will be available as Pre-Release on my PATREON PAGE ! By subscribing to my Patreon you help me purchase more of these Extraordinary cars... so go for it

Btw the car will have 2 options for roof as mentionned before... one Paited and a Glas version!

here some screens:

Don't forget... PRE-RELEASE on my PATREON PAGE tomorrow!!!

Starting to look like something now

Trunk is now done, had to improvise since i had no screens of it. And did a partial Texture session!

I'm off to the movies now :p
Cheers

@FoxtrotDelta As far as i know we are 3 working on it curious to see the results.

Finished adapting enginebay + 3k polys gain again:

@FoxtrotDelta Its not detailed enough, no visible mechanical parts & it is too highpoly (90k)!
I could have used Forza engine... but again too highpoly so i used CSR2 (only 14k Polys) , at least something.

Problem is i'm tryin not to cross the 500k Polys limit! Don't want to be forced to reduce quality of shaders just to have a much better lookin engine!! I've done a couple of Squir models so far and this has always been an issue

Couple of details i'll probably take over or i'll use some Forza details...

Look for yourself

This thread went way out of context, what i actually ment about "ignored" in my last post was... the great content gets burried under the low quality releases on the site, and the only way to fix that if you are not ready to filter all of it and clean it up is to introduce a Rank system that is able to support and promote the great and premium work by tagging them with some sort of banner or other thing... cause like we said, alot of hours go into those works, and all we want is a small support!
We are not asking you to share your part of the 93.000 € with us @Dark0ne ! We are not asking you to fill our pockets with Gold or "thousands of dollars" like @FoxtrotDelta mentionned before. We are not asking to introduce a "PAY IT OR LEAVE" button. All we want is YOU to allow and support us to use external links so we can get a little something to pay at least licensing of our Softwares and future content for you again to enjoy!

Patreon isn't the goldmine everyone think it is! Most of us don't even have 1 Patron over there! And Donations... Please!!! Not even one 1 Donation in 2 years! People do not want to pay money for something they can get for free. And we are not asking them to pay for it... not all all! All they have to do is click on 2 links and they have theyr FREE mod! Sharemods works with a rewarding system, the more downloads you have, the more you are rewarded with points,... you can read it by yourself if you want. Incorporate this system to your page and we modders will be happy and so will you!

Me personally am not that impulsive, and i'm not going to Delete my account right away. Cause i still believe there is a way to bring all this to a point everyone could be satisfied. But i for sure will stop Uploading to this site as well for now and seww where you will lead all of this!

It's not much we are asking.

And sorry if my words are not well chosen, my English is not my Native language!

Cheers.

Got a bit lost and forgot to upload the Pictures, made some more progress and car is already ready for a Beta Release on my Patreon page!
Soon here: https://www.patreon.com/Asyr0nGaming

Cheers

First Spawn Screenshots!
Still some work to do but looks okay for a 1st

Cheers

Little progress made last night! Couple of parts remodeled and adapted to fit Sergio's Body!

• Doorsills
• Doors interior

More soon...

Hello guys an gals!
After the F60... here comes the Pininfarina Ferrari Sergio! Limited to 6, it is one of Ferrari's Limited Editions!
More infos here:
https://www.topgear.com/car-news/supercar/meet-first-production-ferrari-sergio

WIP started with a hunt of different parts to adapt to this beautyful Squir 3D model!
Planned work:

• New Full HQ Interior
• HQ Doorsills & Doors
• HQ Boot
• HQ Engine
• ... (More to come)

Hope you are excited for it! No release date for it yet!

OLD & OBSOLETE PARTS to be replaced:

And for those willing to support me:
Ferrari F60 Special Black & White Edition will be available soon on my Patreon Page for you to enjoy!

Cheers

Pre-Release Beta Version available on my Patreon Page Now!
Final version will be available in few days for free on 5mods as usual.
For those willing to support me... Thank you very much

Link: Patreon Link to Ferrari F60 America Pre-Release

Conversion Process Starts NOW!

@Reazul [DTD] We are already working on it. Tryin to bring a version with working Softtop, will take a moment!

H guys, long no see ^^
I'm still a noob at this and that's why i need your opinions and maybe your help

There are already a few working things but still alot of work to do like:
Better Interior Textures (Needs some serious work)
Lights
Window Collisions
Reflecting Mirrors
...

Release Date isnt yet sure!
This is how it looks so far:

UPDATED 06.09.2016 (Working Now):

• Collisions
• Dials
• Steeringwheel + hands on it
• Reflecting Mirrors

Needs Work:

• Textures (Still need to work on it, they really are fucked up ^^)
• Lights need to be redone (recut,...)

Few images:

The Car is beiing uploaded and waiting for approval!
Still some Work to do... enjoy the Car anyway till i get everything done!